Blind Motor (no radio), 12 lb lift
12 volt DC, 12 lb lift (5.5 Kg) using 1.5" O.D. tube, no radio. Often used for RV blind and shade REPLACEMENT or RETROFIT. Use with dash switches; see article with helpful tips from folks that have done it.
Categories
Here is our article with helpful tips from folks that have done it
Specifications:
12 lb lift (5.5 Kg) when using 1.5" O.D. tube
- includes motor, tube adapters (1 3/8" - 35mm ID) and hanging brackets
- often used as RV shade and blind replacement motor
- control type: no radio, can use our DCC-1W-12-24 controller, or rocker switch
- lift capacity with standard adapters: 12 lb lift (5.5 Kg) with 1.5" O.D. tube
- torque: 1.5 Nm
- speed: 28 rpm
- nominal voltage: 12 v DC (safe for children and adults)
- minimum voltage: 9.5 v DC
- max turns in one direction: unlimited
- upper/lower limits: 'learning type', set by controller positioning
- current consumption: 1500 mA (3000 mA at stall)
- noise level: 39db
- net weight: 272 g
- accepts industry standard 1.5" Rollease® OD tubing: YES (1/16" wall, 1 3/8" ID)
- accepts any round tubing: YES
- minimum tube length: 12" (30.5 cm)
- maximum tube length: unlimited
- tested life: 30,000+ cycles
- Stall Current: 3000 mA
- No Load Speed: 28 rpm
- Operating Voltage: 12v DC
- Operating Current: 1500 mA
- Measured Lift Capacity: 12 lb lift (5.5 Kg) with 1.5" OD (38mm) tube
- Max Rotations: unlimited
- Length Overall: 11" (280mm)
- Length in Tube: 10.5" (267mm)
- Drive Diameter: 1.378" (35mm)
- Built-in Radio: no
- Standby Current: 0 mA
- Torque: 1.5 Nm
- Weight: 9.6 oz (272g)
