Categories

DIY Drapery & Curtain Motor Kit 1 - Battery Radio Motor

Kit#1: drapery and curtain motor kit for motorized opening and closing of drapes and curtains. Remote control, battery operated wireless convenience. Can be used with all types of curtain rails and rods, perfect for retrofit.

More details

On sale On sale!
$US 297.00 tax excl.

CCK-1-10-B

Availability: available

 

This drapery motor kit uses our radio equipped, rechargeable battery motors (AC charger and 5 channel remote provided) that utilize RF (Radio Frequency) for transmission of the remote control signal. A small antenna in the motor receives the control signal and an onboard microprocessor then uses the decoded signals to activate the motor. Solar chargers are available.

Features:

  • very affordable
  • very easy to install
  • robust, with a long life
  • operation is very quiet
  • compatible with our LED lighting systems.
  • unobtrusive, without a visual impact on the room.
  • green, with very low power consumption and solar option
  • adaptable, can be used with any type of curtain track or rod
  • compatible with our extended internet remote control system for phones, tablets, PC
  • Solar charger is available
  • Z-WAVE group controller is available

The drapery kit comes with the battery motor pre-mounted in tube with sprocket and mounting brackets, which are easily screwed to an adjacent wall. It works well with just about any off-the-shelf track or rod you can buy, if you are starting from scratch.

You can use bead chain or nylon cord attached to the first drapery or curtain hanger, then it runs back to the battery motor, and around a drive sprocket (provided) on top of the motor. It then runs down the length of the rail or rod, around an idler sprocket that you have mounted at the other end (sprocket and mounting bracket provided) and finally attaches to the first hanger, same as the other end of the nylon cord or bead chain.

If you can drill a hole and tighten a bolt, you can do this. Here are the instructions.

List of Contents:

  • 1 x remote control battery motor
  • 1 x AC charger
  • 1 x 5 ch remote control, compatible with our other blind motors & controllers
  • 1 x motor, tube and sprocket assembly (with motor installed)

Please note that if you need bead chain, it is available by the foot.

Dimensions:

  • Overal Length: 22 inch (56 cm)
  • Top View: 3 inch x 3 inch (7.5 cm x 7.5 cm)
  • Remote Included 8 channel hand held, wall holster
  • Measured Lift Capacity: 10 lb lift (4.5 Kg) with 1.5" OD (38mm) tube
  • Max Rotations: unlimited
  • Drive Diameter: 1.378" (35mm)
  • Compatible with our hand held and wall mount remotes YES
  • Built-in Rechargeable Battery YES
  • Built-in Radio: YES
  • Solar Charger Included NO

Cart  

FREE SHIPPING TO USA & CANADA IF SUB-TOTAL EXCEEDS $400

No products

Shipping: $US 0.00
Total $US 0.00

Cart Check out

PayPal