Categories

Z-Wave Relay Module with 3 Independant Relays

This unit controls 3 different relays with bi-stable or momentary switches. Bi-stable switching is the default, but it can be re-programmed with a Z-Wave hub for momentary toggle behavior. Relays are 2 x 15 amp, 1 x 20 amp.

More details


$US 79.00 tax excl.

DCC-ZW-12MT

Availability: available

The default mode uses bi-stable switches, which are the type used to turn lights on/off (a 2 position switch). When the switch is on, the relay is on. When the switch is off, the relay is off.

It can also be re-programmed with your Z-Wave hub to act as a momentary switch, with control latching of 3 relays, individually or all at once (toggle mode).

Press and release once, the relay turns on and stays on; press and release the momentary switch again, the relay turns off and stays off.

It can also be connected to our wired wall switch to control motors, please see article series about controlling window openers, skylight openers and blinds.

Relays are 2 x 15 amp, 1 x 20 amp.

Dimensions:

4" x 2.5" x 1.5" (103mm x 63mm x 38mm)

Power: 5v DC (USB C), 12v DC or 24v DC

Cart  

FREE SHIPPING TO USA & CANADA IF SUB-TOTAL EXCEEDS $400

No products

Shipping: $US 0.00
Total $US 0.00

Cart Check out

PayPal