Blind Motor-radio, 45lb lift
The 'Maxi' series G - 12 volt DC, 45 lb lift (22 Kg) when using 2.5" Rollease style O.D. tube, with radio. For use with our multi-channel remote control systems.
Categories
Our "MAXI" series G model: 45 lb lift (20 Kg) when using 2.5" Rollease style O.D. tube, see bracket detail here. Programming instructions for remote control blind motors are here.
- See our article series about how easy it is to use our BroadLink phone app as a home automation controller.
- control type: built-in radio controller, can use our multi-channel remotes and ZWAVE controller interface for Vera, Wink, SmartThings, and any other ZWAVE home automation system
- use 'in window' solar charger or AC charger
- includes motor, tube adapters and hanging brackets
- control type: radio, can use any of our multi-channel remote controls
- lift capacity with standard adapters: 45 lb lift (~20 Kg) with 2.5" O.D. tube
- torque: 10 Nm
- speed: 9 rpm
- nominal voltage: 12 v DC (safe for children and adults)
- maximum current draw: 4 amp @ 12v DC
- max turns in one direction: unlimited
- upper/middle/lower limits: 'learning type', set by remote control
- noise level: 38db
- net weight: 1.8 kg - 4 lb
- made for industry standard 2.5" Rollease® OD tubing: YES
- can use generic round tubing with smooth inside wall: YES
- minimum tube length: 28" (71 cm)
- maximum tube length: unlimited
- ingress protection: IP44
- duty cycle: 10 min
- tested life: 30,000+ cycles
- Torque: 10 Nm
- Operating Voltage: 12v DC
- No Load Speed: 9 rpm
- Measured Lift Capacity: 45 lb (20kg) with 2.5" OD (63mm) tube
- Max Rotations: unlimited
- Drive Diameter: 2.4" (60mm)
- Compatible with our hand held and wall mount remotes YES
- Comparison Table See product description for comparison table
- Built-in Rechargeable Battery NO
- Built-in Radio: YES
