Blind Motor-radio, 12 lb lift

12 volt tubular motor: 12 lb lift (5.5 Kg) when using 1.5" O.D. tube. Programming instructions for remote control blind motors are here.

• See our article series about how easy it is to use our BroadLink phone app as a home automation controller.
• You can use any of our built-in radio motors with Z-Wave when you couple it with our Z-Wave Group Controller.
• control type: built-in radio controller, can use our multi-channel remotes and optional ZWAVE interface kit for Vera, Wink, SmartThings and any other ZWAVE home automation systems

• includes motor, tube adapters (1 3/8" - 35mm) I.D. and hanging brackets
• control type: built-in radio controller, can use our multi-channelchannel remotes
• lift capacity with standard adapters: 12 lb (5.5 Kg) with 1.5" O.D. tube
• torque: 1.5 Nm
• speed: 32 rpm
• nominal voltage: 12 v DC (safe for children and adults)
• minimum voltage: 9.5 v DC
• standby current: 60 uA (micro-amps)
• max turns in one direction: unlimited
• upper/lower limits: 'learning type', set by remote control positioning
• current consumption: 850 mA (1200 mA at stall)
• noise level: 39db
• net weight: 272 g
• accepts industry standard 1.5" OD tubing: YES (1/16" wall, 1 3/8" ID)
• Compatible with Rollease: yes
• minimum tube length + brackets: 13.5" (34 cm)
• maximum tube length: unlimited
• tested life: 30,000+ cycles