Blind Motor-radio,battery,16 lb lift

battery powered tubular motor: 16 lb lift (7.25 Kg) when using 1.5" OD tube. Programming instructions for remote control blind motors are here. See our article series about how easy it is to use our BroadLink phone app as a home automation controller.

• battery powered, no installation wiring required
• control type: built-in radio controller, can use our multi-channel remotes and ZWAVE controller for Vera, Wink, SmartThings, and any other ZWAVE home automation system
• includes motor, tube adapters (1 3/8" - 35mm I.D.) and hanging brackets
• built-in rechargeable battery lasts 3 to 6 months with normal daily use
• optional solar panel greatly extends rechargeable battery life
• control type: built-in radio controller, can use our multi-channel remotes and ZWAVE controller for Vera™, Wink™, SmartThings™, and any other ZWAVE home automation system
• lift capacity with standard adapters: 16 lb lift (7.25 Kg) with 1.5" OD tube
• torque: 1.1 Nm
• speed: 40 rpm
• nominal charging voltage: 12v DC (safe for children and adults)
• max turns in one direction: unlimited
• upper/lower limits: 'learning type', set by remote control
• standby current consumption: 0.01 mA
• noise level: 36db (very quiet)
• net weight: 272 g
• accepts industry standard 1.5" OD tubing: YES (1/16" wall, 1 3/8" ID)
• compatible with Rollease® style tubing: yes
• accepts any round tubing: YES
• minimum tube length: 21" (52 cm)
• minimum window width (with bracket allowance): 17.5" (45 cm)
• setscrew hole for smooth inside tubes should be at 43 cm from tube end (16 5/8")
• maximum tube length: unlimited
• tested life: 30,000+ cycles